Chapter 17 Tools
NBG-416N User’s Guide
134
Click Maintenance > Tools. Follow the instructions in this screen to upload
firmware to your NBG-416N.
Figure 80 Maintenance > Tools > Firmware
The following table describes the labels in this screen.
Note: Do not turn off the NBG-416N while firmware upload is in progress!
After you see the Firmware Upload In Process screen, wait for several minutes
before logging into the NBG-416N again.
Figure 81 Upload Warning
Table 50 Maintenance > Tools > Firmware
LABEL DESCRIPTION
File Path Type in the location of the file you want to upload in this field or click
Browse... to find it.
Browse... Click Browse... to find the .bin file you want to upload. Remember that
you must decompress compressed (.zip) files before you can upload them.
Upload Click Upload to begin the upload process. This process may take up to
two minutes.
To Next Page
Loading...
