Chapter 5 AP Mode
NBG-416N User’s Guide
53
5.4 Configuring Your Settings
Use this section to configure your NBG-416N settings while in AP Mode.
5.4.1 LAN Settings
Click Network > LAN to see the screen below.
Wireless
LAN
General Use this screen to configure wireless LAN.
MAC Filter Use the MAC filter screen to configure the NBG-416N to
block access to devices or block the devices from
accessing the NBG-416N.
Advanced This screen allows you to configure advanced wireless
settings.
QoS Use this screen to configure Wi-Fi Multimedia Quality of
Service (WMM QoS). WMM QoS allows you to prioritize
wireless traffic according to the delivery requirements of
individual services.
WPS Use this screen to configure WPS.
WPS Station Use this screen to add a wireless station using WPS.
Scheduling Use this screen to schedule the times the Wireless LAN is
enabled.
LAN IP Use this screen to configure LAN IP address and subnet
mask.
Maintenance
System General Use this screen to view and change administrative
settings such as system and domain names, password
and inactivity timer.
Time Setting Use this screen to change your NBG-416N’s time and
date.
Logs View Log Use this screen to view the logs for the categories that
you selected.
Tools Firmware Use this screen to upload firmware to your NBG-416N.
Configuration Use this screen to backup and restore the configuration
or reset the factory defaults to your NBG-416N.
Restart This screen allows you to reboot the NBG-416N without
turning the power off.
Sys OP
Mode
General This screen allows you to select whether your device acts
as a Router or a Access Point.
Language Language This screen allows you to select the language you prefer.
Table 20 Menu: AP Mode (continued)
LINK TAB FUNCTION
To Next Page
Loading...
