NBG-416N User’s Guide
49
CHAPTER 5
AP Mode
5.1 Overview
This chapter discusses how to configure settings while your NBG-416N is set to AP
Mode. Many screens that are available in Router Mode are not available in AP
Mode.
Note: See Chapter 6 on page 57 for an example of setting up a wireless network in
AP mode.
Use your NBG-416N as an AP if you already have a router or gateway on your
network. In this mode your device bridges a wired network (LAN) and wireless
LAN (WLAN) in the same subnet. See the figure below for an example.
Figure 24 Wireless Internet Access in AP Mode
5.2 Setting your NBG-416N to AP Mode
1 Log into the Web Configurator if you haven’t already. See the Quick start Guide for
instructions on how to do this.
To Next Page
Loading...
