Chapter 17 Tools
NBG-416N User’s Guide
138
If the upload was not successful, the following screen will appear. Click Return to
go back to the Configuration screen.
Figure 87 Configuration Restore Error
17.4.3 Back to Factory Defaults
Pressing the Reset button in this section clears all user-entered configuration
information and returns the NBG-416N to its factory defaults.
You can also press the RESET button on the rear panel to reset the factory
defaults of your NBG-416N. Refer to Section 3.3.1 on page 27 for more
information on the RESET button.
17.5 Restart Screen
System restart allows you to reboot the NBG-416N without turning the power off.
Click Maintenance > Tools > Restart. Click Restart to have the NBG-416N
reboot. This does not affect the NBG-416N's configuration.
Figure 88 Maintenance > Tools > Restart
To Next Page
Loading...
