Chapter 3 The Web Configurator
NBG-416N User’s Guide
26
4 Type admin (default) as the user name and 1234 (default) as the password and
click OK.
Figure 3 Login Screen
5 You should see a screen asking you to change your password (highly
recommended) as shown next. Type a new password (and retype it to confirm)
and click Apply or click Ignore.
Figure 4 Change Password Screen
Note: The management session automatically times out when the time period set in
the Administrator Inactivity Timer field expires (default five minutes). Simply
log back into the NBG-416N if this happens.
6 Select the setup mode you want to use.
•Click Go to Wizard Setup to use the Configuration Wizard for basic Internet
and Wireless setup.
•Click Go to Advanced Setup to view and configure all the NBG-416N’s
settings.
To Next Page
Loading...
