Chapter 4 System Setting
NSA-220 Plus User’s Guide
107
4.3 The Date/Time Screen
Use this screen to select a time zone and a time server from which your NSA can
get the time and date. This time is then used in NSA logs and alerts.
Click the System Setting link in the navigation panel and then click the Date/
Time link to access the Date/Time screen.
Figure 20 System Setting > Date/Time
The following table describes the labels in this screen.
Table 15 System Setting > Date/Time
LABEL DESCRIPTION
Current System Date Time Setting
Current Time This field displays the time of your NSA.
Current Date This field displays the date of your NSA.
Date Time Setup
Manual Select this radio button to enter the time and date manually.
When you enter the time settings manually, the NSA uses the
new setting once you click Apply.
Note: If you enter time settings manually, they revert to their
defaults when power is lost.
To Next Page
Loading...
