ZyXEL Communications NSA-220 Plus - Displaying the Storage Screen

Chapter 5 Storage
NSA-220 Plus User’s Guide
113
5.2.2 Displaying the Storage Screen
Click Storage in the navigation panel to display the following screen. Use this
screen to display internal and external volumes on the NSA.
Note: It is recommended to scan the volume every three months or 32 reboots.
Figure 21 Storage
The following table describes the labels in this screen.
Table 16 Storage
LABEL DESCRIPTION
Internal/External
Volume
These tables display information on all internal volumes (created
on NSA internal disk drives) and external volumes (created on
external disk drives attached to the NSA USB ports).
Create an Internal
Volume
Click this to format internal hard drives and create a new
volume. All data on the disk(s) will be lost.
Create an External
Volume
Click this to format an external hard drive and create a new
volume. All data on the disk will be lost.
Status This field shows whether the volume is Healthy, Resync,
Recovering, Degraded, or Down. See Section 5.3.1 on page
116 for details on a volume’s status.
Volume The NSA creates the volume name automatically. You can edit
it.
Disk Configuration This field shows which disks and data storage system the
volume is using.
File System This field displays the file system that an external (USB) volume
is using.