Chapter 12 Maintenance Screens
NSA-220 Plus User’s Guide
271
12.6 SSL
Click Maintenance > SSL to open this screen, where you can turn on HTTPS,
create a public key certificate, or upload a public key certificate that was issued by
a known certificate authority.
Figure 119 Maintenance > SSL
Restore Configuration After you restore a configuration, if a share path does not exist,
then it appears be in red.
Browse Click this to locate a previously-saved configuration file.
Restore Click this to load the previously-saved configuration file to the
NSA. This replaces your current NSA configuration settings with
the settings in the previously-saved configuration file.
A pop-up screen appears asking you to confirm. Click OK to
continue or Cancel to quit.
Table 98 Maintenance > Configuration
LABEL DESCRIPTION
To Next Page
Loading...
