Chapter 2 Web Configurator Basics
NSA-220 Plus User’s Guide
48
2.7.1 Session Example (Windows)
Open Windows Explorer and type two back slashes followed by the NSA name or
IP address. Initially you can only read and write to the Public, Video, Music, and
Photo folders until you create other shares on the NSA. This session is then
displayed as shown in the following figure.
Session Example (Windows)
Disk(s) For internal drives, this shows which hard drive bays are
included in the volume. For external drives, this field shows
USB1 for the first external hard drive you connect to the NSA
(regardless of which USB port) and USB2 for the second.
Disk Usage This field shows total disk size, the percentage of the disk being
used and the percentage that is available.
Active Sessions This shows how many users are currently connected to the NSA.
Type This shows whether it’s a Windows/CIFS, web (web
configurator), or FTP connection to the NSA.
Share Name This displays the shared folder name on the NSA that the user is
connected to for CIFS sessions and is blank for FTP sessions.
Username This displays the name of the user connected to the NSA if one is
defined. ANONYMOUS FTP displays if a username is not
defined for the user’s connection.
Connected At This displays the date and time the user last connected to the
NSA in year, month, day, hour, minute, second format.
IP Address This displays the IP address of the computer connected to the
NSA.
Table 12 Status (continued)
LABEL DESCRIPTION
To Next Page
Loading...
