Chapter 8 Package Management
NSA-220 Plus User’s Guide
211
8.8.2 SMART Full Summary
Use this screen to display more details information about the volume.
Click Full Summary in the Storage > S.M.A.R.T screen to display the following.
Figure 89 Storage > S.M.A.R.T: Full Summary
Health This describes the overall health of the volume based on S.M.A.R.T
diagnostics.
Performance This shows your hard disk’s performance. Refer to Section 8.8.2 on
page 211 for more information on how S.M.A.R.T determines your
hard disk’s condition. This displays:
• Good - This shows when you compare each Value with the
Threshold Value and all the Value is greater than the
Threshold Value.
• Bad - This shows when you compare each Value with the
Threshold Value and at least one Value is less than or equal to
the Threshold Value.
Detailed Information
Model Family This shows the vendor and product family of the hard disk.
Device Model This shows the factory model of the hard disk.
Serial Number This shows the serial number of the hard disk.
Firmware Version This shows the firmware version installed in the hard disk.
User Capacity This shows the total hard disk space of the hard disk volume.
ATA Version This shows the ATA version of the hard disk, which refers to an
industry standard category for storage devices and connectors used.
ATA Standard This field displays the Advanced Technology Attachment standard the
hard drive supports.
Local Time This field displays the local time that the hard drive is using.
SMART support This field displays whether or not the hard drive is SMART-capable.
SMART support This field displays whether or not the hard drive has SMART
monitoring turned on.
OK Click this to close the window.
Table 63 Storage > S.M.A.R.T: Brief Summary
LABEL DESCRIPTION
To Next Page
Loading...
