Chapter 12 Maintenance Screens
NSA-220 Plus User’s Guide
275
12.8 The Shutdown Screen
Click Maintenance > Shutdown to open the following screen.
Use this screen to turn off the NSA or perform a software restart. A software
restart is faster than turning the NSA off and then turning it on again. Before
shutting down or restarting, check the System Status > Active Sessions screen
to make sure that no one is logged into the NSA or transferring files to or from the
NSA.
Figure 122 Maintenance > Shutdown
The following table describes the labels in this screen.
When you click the Restart button a pop-up screen will appear asking you to
confirm. Click OK to continue or Cancel to quit the restart.
Figure 123 Maintenance > Shutdown > Confirm Restart
When you click the Shutdown button a pop-up screen will appear asking you to
confirm. Click OK to continue or Cancel to quit the shutdown.
Figure 124 Maintenance > Shutdown > Confirm Shutdown
Table 102 Maintenance > Shutdown
LABEL DESCRIPTION
Restart Click this to have the device perform a software restart.
Shutdown Click this to shut down the system and restart it again later.
To Next Page
Loading...
