ZyXEL Communications NSA-220 Plus - Edit IP Filter

Chapter 8 Package Management
NSA-220 Plus User’s Guide
199
8.5.8 Edit IP Filter
Use this screen to enable IP filtering which prevents your NSA from accessing
certain networks and IP addresses that may be hosting malicious programs.
Figure 78 Applications > eMule > Task > Preferences: Edit IP Filter
The following table describes the labels in this screen.
Edit IP Filter Click this to edit the IP Filter.
IP filtering prevents your NSA from accessing certain networks and IP
addresses that may be hosting malicious programs.
Refer to Section 8.5.8 on page 199 to view and configure the Edit IP
Filter screen.
Apply Click this to save your changes.
Reset Click this to clear the fields.
Cancel Click this to return to the previous screen without saving.
Table 53 Applications > eMule > Task > Preferences
LABEL DESCRIPTION
Table 54 Applications > eMule > Task > Preferences: Edit IP Filter
LABEL DESCRIPTION
Enable IP Filter Click this to enable IP filtering. This prevents your NSA from
accessing certain networks and IP addresses that may be hosting
malicious programs.
Select Update IP Filter Table File from the Internet Every Week
if you know the web location of the IP filter table you want to use.
Enter the link where your NSA can acquire the list of networks and IP
addresses. The NSA checks this link every week and uses the latest
IP filter table available.
Select Upload IP Filter Table if you want to use an IP filter table
from your local computer.
Apply Click this to save your changes.
Reset Click this to return to the previous screen without saving.