ZyXEL Communications NSA-220 Plus - Page 198

Chapter 8 Package Management
NSA-220 Plus User’s Guide
198
Edit Click this to open the following screen where you can set the default
folder location where you “Put incomplete downloads in” and
“Move complete downloads to”:.
• Share - Select the destination share from the drop-down list.
• Path - This field displays the share folder’s path. You can use
Browse to find or create a folder on the NSA or type the location
of the folder using forward slashes as branch separators.
• Current Location - This is the location of the selected folder.
• Folder Name - Enter a new folder name and click to create
it.
• Type - This identifies the item as a folder or file.
• Name - This is the name of the folder/file.
Select a folder. If you don’t select a folder, a forward slash (/)
displays in the Path field. All contents within the specified share are
automatically selected.
Click Apply to save your settings and Cancel to close the screen.
Port Number
UDP Port Enter the UDP port number you want to use for file transfers.
TCP Port Enter the TCP port number you want to use for file transfers.
Upload and Download Rate
Max. download
rate
Enter the maximum download rate for download tasks.
Max. upload rate Enter the maximum upload rate for upload tasks.
Connection
Maximum
Number of Active
Connections
Enter the maximum number of eMule peer-to-peer connections.
IP Filter
Table 53 Applications > eMule > Task > Preferences
LABEL DESCRIPTION