Chapter 2 Web Configurator Basics
NSA-220 Plus User’s Guide
46
2.7 The Status Screen
The Status screen is the first main web configurator screen you see after you
enter the administrator screens. To view the status screens, click Status on the
top-left of the navigation panel.
Figure 18 Status
The following table describes the labels in this screen.
Table 12 Status
LABEL DESCRIPTION
Status Click this to refresh the status screen statistics.
System Information
Server Name This displays the name which helps you find the NSA on the
network. Click the Edit icon to go to the screen where you can
configure this.
Model Name This displays which model this NSA device is.
Firmware Version This is the NSA firmware version. Click the Edit icon to go to the
Maintenance > FW Upgrade screen from which you can
upload new firmware.
MAC Address This displays the NSA’s unique physical hardware address
(MAC). You need the MAC address to register the product at
myZyXEL.com. Customer support may also request it for
troubleshooting purposes.
Media Server
Status
This shows whether the media server function is enabled or
disabled. It must be enabled for media clients to play content
files stored on the NSA. Click the Edit icon to go to the screen
where you can configure this.
FTP Server Status This shows whether the FTP server function is enabled or
disabled. It must be enabled to use FTP file transfer to/from the
NSA. Click the edit icon to go to the screen where you can
configure this.
Web Publishing
Status
This shows whether the Web server function is enabled or
disabled. It must be enabled to use HTTP to access shares on
the NSA. Click the Edit icon to go to the screen where you can
configure this.
To Next Page
Loading...
