Chapter 12 Maintenance Screens
NSA-220 Plus User’s Guide
261
Type Select whether this power control schedule has the NSA turn on, turn
off, or reboot.
Frequency Select whether the NSA is to apply this power control schedule entry on
a monthly, weekly, or daily basis.
Execute Time
(hh:mm)
Enter the time, day, and/or day of the month as appropriate for this
power control schedule entry. Leave more than 10 minutes between the
execution times of the entries.
If the NSA turns off or restarts while a user is transferring files to or from
the NSA, the transfer fails. The user will need to restart the transfer.
The NSA skips a scheduled restart or power off if the execution time
comes while the NSA is doing any of the following:
• Resynchronizing a RAID
• Upgrading firmware
• Replacing the configuration file
If the NSA is turned off at the time when a restart or power off is
scheduled, the NSA does not perform the restart or power off.
If the NSA is turned on at the time when a power on is scheduled, the
NSA does not perform the power on.
Please select
the day of the
month
Use this part of the screen to configure power on, power off, and reboot
times.
Add Click this to add the power control schedule to the list.
Apply Click this to save your changes.
Cancel Click this to return to the previous screen without saving.
Table 93 Maintenance > Power Management > Edit (continued)
LABEL DESCRIPTION
To Next Page
Loading...
