Figure 39 AP broadcast the CAPWAP packet to controller
When AP gets the IP, you will see the IP shows on the console.
Figure 40 Tera Term > AP > Router > show interface all
3 Check the mode of unified AP
If the AP is unified access point, please access the AP via SSH or console
cable to check the mode.
Figure 41 The table of the Module of Unified Access Point
Check the mode of the unified AP via console cable or SSH.
Console:
Figure 42 Tera Term > AP > Router > show hybrid-mode
If the mode is “controller” or “standalone”, please change the
configuration to the “managed”. The configuration can be changed by
console or GUI.
Figure 43 Tera Term > AP > Router > configure terminal > hybrid-mode
managed
AP GUI:
Auto: AP broadcast the CAPWAP packet let controller know.
If the DHCP server set Option 138 with controller IP, the APs get the IP from
DHCP server will get the AC-IP and find the controller directly.
Figure 44 CONFIGURATION > MGNT Mode > Managed AP > Auto
To Next Page
Loading...
