Figure 176 Configuration > Wireless > AP Management > Mgnt. AP List > Edit
AP List
7.5 Symptom: Why station disconnect during roaming
If the station disconnect during roaming, please follow the steps to
troubleshooting.
1. Check AP2’s the SSID, Security, and DHCP server are the same as AP1.
2. Check “Band Select” is disable
3. Check AP1 and AP2’s coverage overlap
4. Check the RSSI of overlapped area.
1 Check AP2’s the SSID, Security, and DHCP server are the same as AP1
Please refer to the troubleshooting step 1 of previous symptom for checking
the configuration.
2 Check “Band Select” is disable
If band select enables, station needs to spend more time to connect with
AP and causes the roaming disconnection.
Figure 177 Configuration > Object > AP profile > SSID > Edit SSID Profile
To Next Page
Loading...
