Figure 93 CONFIGURATION > Wireless > AP Management > AP Group > Edit >
Radio 2 Setting
Edit Managed AP by single
Figure 94 CONFIGURATION > Wireless > AP Management > Mgnt. AP List >
Edit
Check managed AP status on controller.
Figure 95 MONITOR > Wireless > AP Information > AP List
Note: Make sure radio 1 and 2 are activated and applied with the correct
profiles.
2 Check AP’s wireless card
There are two symptoms when the wireless card has problem.
LED WLAN is off
SSID doesn’t broadcast
Check controller’s MAC address incorrect? Is there any status show n/a?
Figure 96 MONITOR > Wireless > AP Information > Radio List
To Next Page
Loading...
