Check the security profile with 802.1X authentication.
Figure 186 CONFIGURATION > Object > AP profile > SSID > SSID List > Edit
Check AP whether set the AP profile that you created.
2 Check the port number of RADIUS server
To confirm the network traffic, please make sure the port of server is same as
that configured in the NXC5500 and login the console of NXC and RADIUS
server.
Figure 187 Check the port number
The default port of RADIUS server in the NXC is 1812. If you have the firewall
in network, please check those ports also are opened in the firewall.
3 Ping the external RADIUS server and AP
To confirm the network traffic, please make sure the port of server is same as
that configured in the NXC5500 and login the console of NXC and RADIUS
server.
Figure 188 Ping the external RADIUS server and AP
Confirm the fluent network traffic between AP and external RADIUS server.
NXC ping to external RADIUS server and AP.
Figure 189 Tera Term > NXC > Router > ping <RADIUS server’s IP> and AP’s IP
To Next Page
Loading...
