Select the interface and press the bottom “Capture” before station
connect the SSID and do the 802.1X authentication.
Figure 194 MAINTENANCE > Diagnostics > Packet Capture.
The CLI command and debug log
Follow below steps to retrieve the 802.1x debug log
Login by console or SSH using admin account
Figure 195 Tera Term > NXC > Router> enable > debug authentication
server log move to ftp
Login controller by ftp server using admin account
Download the /tmp/RADIUS.log from the ftp
Figure 196 Computer > cmd > ftp <NXC’s IP> > cd/tmp > ls > get radius.log
To Next Page
Loading...
