Chapter 3 Introducing the Web Configurator
PLA5236 User’s Guide
21
3.3.2 Navigation Panel
Use the menu items on the navigation panel to open screens to configure PLA features. The following
tables describe each menu item.
Table 5 Navigation Panel: Access Point Mode
LINK TAB FUNCTION
Dashboard This screen shows the PLA’s general device, system and interface status
information. Use this screen to access the summary statistics tables.
MONITOR
Log Use this screen to view the list of activities recorded by your PLA.
Packet Statistics Use this screen to view port status and packet specific statistics.
WLAN 2.4G
Station Status
Use this screen to view the details about the devices connected to your PLA,
using the 2.5G wireless connection.
WLAN 5G Station
Status
Use this screen to view the details about the devices connected to your PLA,
using the 5G wireless connection.
CONFIGURATION
Network
Wireless LAN
2.4 and
Wireless LAN
5G
General Use this screen to configure general wireless LAN and wireless security settings.
MAC Filter Use the MAC filter screen to configure the PLA to block access to devices or
block the devices from accessing the PLA.
Advanced This screen allows you to configure advanced wireless settings.
QoS Use this screen to configure Wi-Fi Multimedia Quality of Service (WMM QoS).
WMM QoS allows you to prioritize wireless traffic according to the delivery
requirements of individual services.
WPS Use this screen to configure WPS.
WPS Station Use this screen to add a wireless station using WPS.
Scheduling Use this screen to schedule the times the Wireless LAN is enabled.
LAN IP Use this screen to configure LAN IP address and subnet mask.
IP Alias Use this screen to have the PLA apply IP alias to create LAN subnets.
HomePlug Powerline
Setting
Use this screen to view and change powerline settings.
One Connect Use this screen to enable the One Connect feature. One Connect uses an app
that allows you to easily integrate the PLA and other devices to your home
network.
MAINTENANCE
General Use this screen to view and change administrative settings such as system and
domain names.
Password Password
Setup
Use this screen to change the password of your PLA.
Time Time Setting Use this screen to change your PLA’s time and date.
Firmware
Upgrade
Use this screen to upload firmware to your PLA.
Backup/
Restore
Use this screen to backup and restore the configuration or reset your PLA to
the factory defaults.
Restart System Restart This screen allows you to reboot the PLA without turning the power off.
Language Language This screen allows you to select the language you prefer.
WiFi Mode This screen allows you to select the device Wi-Fi mode: Range Mode,
Performance Mode or Mixed Mode.
To Next Page
Loading...
