Chapter 7 Wireless LAN
PLA5236 User’s Guide
45
The following table describes the labels in this screen.
7.11 Scheduling Screen
Use this screen to set the times your wireless LAN is turned on and off. Wireless LAN scheduling is disabled
by default. The wireless LAN can be scheduled to turn on or off on certain days and at certain times. To
open this screen, click Network > Wireless LAN 2.4G or 5G > Scheduling tab.
Figure 28 Network > Wireless LAN 2.4G or 5G > Scheduling
The following table describes the labels in this screen.
Table 21 Network > Wireless LAN 2.4G or 5G > WPS Station
LABEL DESCRIPTION
Push Button Use this button when you use the PBC (Push Button Configuration) method to configure
wireless station’s wireless settings.
Click this to start WPS-aware wireless station scanning and the wireless security information
synchronization.
Or input station’s
PIN number
Use this button when you use the PIN Configuration method to configure wireless station’s
wireless settings.
Type the same PIN number generated in the wireless station’s utility. Then click Start to
associate to each other and perform the wireless security information synchronization.
Table 22 Network > Wireless LAN 2.4G or 5G > Scheduling
LABEL DESCRIPTION
Wireless LAN
Scheduling
Select Enable to activate the wireless LAN scheduling feature. Select Disable to turn it off.
Scheduling
WLAN Status Select On or Off to specify whether the Wireless LAN is turned on or off. This field works in
conjunction with the Day and For the following times fields.
To Next Page
Loading...
