PLA5236 User’s Guide
54
CHAPTER 10
One Connect
10.1 Overview
This chapter describes the One Connect feature. This feature uses an app that allows you to easily
integrate the PLA and other devices to your home network. Through the app you can view a neighbor
device list, along with detailed information, such as each device’s address, firmware version and
description of its physical location previously noted by the administrator. One Connect can be used to
remotely turn the power of a neighboring powered device (PD), on or off from a distance. And most
importantly, you can easily set up notifications, customize and control all the devices in your network
using your smart phone or tablet.
10.2 What You Can Do
Use the One Connect screen (Section 10.3 on page 54) to enable this One Connect feature and access
your PLA through the Zyxel app.
10.3 One Connect Screen
The One Connect screen has a QR code to help you download the app. Use this screen to Enable or
Disable the One Connect feature in your PLA.
Figure 34 Network > One Connect> Auto-Configuration
To Next Page
Loading...
