Chapter 8 LAN
PLA5236 User’s Guide
48
Figure 30 LAN and WAN IP Addresses
The LAN parameters of the PLA are preset in the factory with the following values:
• IP address of 192.168.1.2 with subnet mask of 255.255.255.0 (24 bits)
8.3.1 LAN TCP/IP
The PLA has built-in DHCP server capability that assigns IP addresses and DNS servers to systems that
support DHCP client capability.
8.3.2 IP Alias
IP alias allows you to partition a physical network into different logical networks over the same Ethernet
interface. The PLA supports three logical LAN interfaces via its single physical Ethernet interface with the
PLA itself as the gateway for each LAN network.
8.4 LAN IP Screen
Use this screen to change the IP address for your PLA. Click Network > LAN > IP.
Figure 31 Network > LAN > IP (Access Point or Universal Repeater)
To Next Page
Loading...
