Chapter 7 Wireless LAN
PLA5236 User’s Guide
41
Figure 23 Network > Wireless LAN 2.4G or 5G > MAC Filter
The following table describes the labels in this menu.
7.7 Wireless LAN Advanced Screen
Use this screen to allow wireless advanced features, such as the output power, and RTS/CTS Threshold.
Table 17 Network > Wireless LAN 2.4G or 5G> MAC Filter
LABEL DESCRIPTION
MAC Address
Filter
Select to turn on (Enable) or off (Disable) MAC address filtering.
Filter Action Define the filter action for the list of MAC addresses in the MAC Filter Summary table.
Select Allow to permit access to the PLA, MAC addresses not listed will be denied access to the
PLA.
Select Deny to block access to the PLA, MAC addresses not listed will be allowed to access the
PLA.
MAC Filter Summary
Set This is the index number of the MAC address.
MAC Address Enter the MAC address of the wireless station that are allowed or denied access to the PLA.
Apply Click Apply to save your changes back to the PLA.
Cancel Click Cancel to reload the previous configuration for this screen.
To Next Page
Loading...
