PLA5236 User’s Guide
55
CHAPTER 11
Maintenance
11.1 Overview
This chapter provides information on the Maintenance screens.
11.2 What You Can Do
• Use the General screen (Section 11.3 on page 55) to set the timeout period of the management
session.
• Use the Password screen (Section 11.4 on page 56) to change your PLA’s system password.
• Use the Time screen (Section 11.5 on page 56) to change your PLA’s time and date.
• Use the Firmware Upgrade screen (Section 11.6 on page 58) to upload firmware to your PLA.
• Use the Backup/Restore screen (Section 11.8 on page 61) to view information related to factory
defaults, backup configuration, and restoring configuration.
• Use the Restart screen (Section 11.8 on page 61) to reboot the PLA without turning the power off.
• Use the Language screen (Section 11.9 on page 61) to change the language for the Web
Configurator.
• Use the WiFi Mode screen (Section 11.10 on page 61)to change the Wi-Fi mode on your PLA.
11.3 General Screen
Use this screen to set the management session timeout period. Click Maintenance > General. The
following screen displays.
Figure 35 Maintenance > General
To Next Page
Loading...
