ZyXEL Communications PLA5236 - Restart Screen; Language Screen; Wi-Fi Mode Screen

Chapter 11 Maintenance
PLA5236 User’s Guide
61
Note: If you uploaded the default configuration file you may need to change the IP address
of your computer to be in the same subnet as that of the default PLA IP address
(192.168.1.2).
11.8 Restart Screen
System restart allows you to reboot the PLA without turning the power off.
Click Maintenance > Restart to open the following screen.
Figure 41 Maintenance > Restart
Click Restart to have the PLA reboot. This does not affect the PLA's configuration.
11.9 Language Screen
Use this screen to change the language for the Web Configurator.
Select the language you prefer and click Apply. The Web Configurator language changes after a while
without restarting the PLA.
Figure 42 Maintenance > Language
11.10 Wi-Fi Mode Screen
The PLA offers three different Wi-Fi modes: Range Mode, Performance Mode and Mixed Mode. Use this
screen to change the Wi-Fi Mode on your PLA.