Chapter 11 Maintenance
PLA5236 User’s Guide
57
Figure 37 Maintenance > Time
he following table describes the labels in this screen.
Table 28 Maintenance > Time
LABEL DESCRIPTION
Current Time and Date
Current Time This field displays the time of your PLA.
Each time you reload this page, the PLA synchronizes the time with the time server.
Current Date This field displays the date of your PLA.
Each time you reload this page, the PLA synchronizes the date with the time server.
Time and Date Setup
Manual Select this radio button to enter the time and date manually. If you configure a new time
and date, Time Zone and Daylight Saving at the same time, the new time and date you
entered has priority and the Time Zone and Daylight Saving settings do not affect it.
New Time
(hh:mm:ss)
This field displays the last updated time from the time server or the last time configured
manually.
When you select Manual, enter the new time in this field and then click Apply.
New Date
(yyyy/mm/dd)
This field displays the last updated date from the time server or the last date configured
manually.
When you select Manual, enter the new date in this field and then click Apply.
Get from Time Server Select this radio button to have the PLA get the time and date from the time server you
specified below.
User Defined Time
Server Address
Enter the IP address or URL (up to 20 extended ASCII characters in length) of your time
server. Check with your ISP/network administrator if you are unsure of this information.
Time Zone Setup
Time Zone Choose the time zone of your location. This will set the time difference between your time
zone and Greenwich Mean Time (GMT).
To Next Page
Loading...
