Chapter 1 Introducing the PLA
PLA5236 User’s Guide
8
Figure 1 Front Panel
The following table describes the behavior of the lights on the PLA.
Table 1 Front Panel LEDs
LIGHTS ICON COLOR STATUS DESCRIPTION
POWER Green On The PLA is on and receiving power.
It also indicates a successful connection using the RESET/
ENCRYPT button.
Blinking Blinking during 10 seconds: The ENCRYPT function has been
active.
Blinking during 120 seconds: The ENCRYPT function has failed.
Off The PLA is not receiving power.
ETHERNET Green On The ETHERNET port is on and ready and the PLA detects a device
connected to it.
Blinking The PLA is communicating with a networking device connected
to it.
Off The PLA does not detect any devices connected to its ETHERNET
port.
Wi-Fi 2.4G
Wi-Fi 5G
Green On The PLA’s wireless signal is ready.
Wi-Fi protected security is enabled.
Slow
Blinking
The WPS is syncing the PLA with another device.
Fast
Blinking
The PLA is transmitting and/or receiving wireless traffic.
The WPS syncing has failed.
Off The wireless signal is disabled.
To Next Page
Loading...
