Chapter 5 Quick Setup Wizards
ZyWALL USG Series User’s Guide
162
Figure 133 VPN Advanced Wizard: Scenario
IKE (Internet Key Exchange) Version: IKEv1 and IKEv2
• IKE (Internet Key Exchange) is a protocol used in security associations to send data securely. IKE uses
certificates or pre-shared keys for authentication and a Diffie–Hellman key exchange to set up a
shared session secret from which encryption keys are derived.
• IKEv2 supports Extended Authentication Protocol (EAP) authentication, and IKEv1 supports X-Auth.
EAP is important when connecting to existing enterprise authentication systems.
Scenario
• Rule Name: Type the name used to identify this VPN connection (and VPN gateway). You may use 1-
31 alphanumeric characters, underscores (_), or dashes (-), but the first character cannot be a
number. This value is case-sensitive.
Select the scenario that best describes your intended VPN connection. The figure on the left of the
screen changes to match the scenario you select.
• Site-to-site - The remote IPSec device has a static IP address or a domain name. This Zyxel Device can
initiate the VPN tunnel.
• Site-to-site with Dynamic Peer - The remote IPSec device has a dynamic IP address. Only the remote
IPSec device can initiate the VPN tunnel.
• Remote Access (Server Role) - Allow incoming connections from IPSec VPN clients. The clients have
dynamic IP addresses and are also known as dial-in users. Only the clients can initiate the VPN tunnel.
• Remote Access (Client Role) - Connect to an IPSec server. This Zyxel Device is the client (dial-in user)
and can initiate the VPN tunnel.
To Next Page
Loading...
