Chapter 43 Object
ZyWALL USG Series User’s Guide
811
Setting up User Attributes in an External Server
To set up user attributes, such as reauthentication time, in LDAP or RADIUS servers, use the following
keywords in the user configuration file.
The following examples show you how you might set up user attributes in LDAP and RADIUS servers.
Creating a Large Number of Ext-User Accounts
If you plan to create a large number of Ext-User accounts, you might use CLI commands, instead of the
Web Configurator, to create the accounts. Extract the user names from the LDAP or RADIUS server, and
create a shell script that creates the user accounts.
43.3 AP Profile Overview
This section shows you how to configure preset profiles for the Access Points (APs) connected to your
Zyxel Device’s wireless network.
• The Radio screen (Section 43.3.1 on page 812) creates radio configurations that can be used by the
APs.
• The SSID screen (Section 43.3.2 on page 818) configures three different types of profiles for your
networked APs.
43.3.0.1 What You Need To Know
The following terms and concepts may help as you read this section.
Wireless Profiles
At the heart of all wireless AP configurations on the Zyxel Device are profiles. A profile represents a group
of saved settings that you can use across any number of connected APs. You can set up the following
wireless profile types:
Table 303 LDAP/RADIUS: Keywords for User Attributes
KEYWORD CORRESPONDING ATTRIBUTE IN WEB CONFIGURATOR
type User Type. Possible Values: admin, limited-admin, dynamic-guest, user, guest.
leaseTime Lease Time. Possible Values: 1-1440 (minutes).
reauthTime Reauthentication Time. Possible Values: 1-1440 (minutes).
Figure 560 LDAP Example: Keywords for User Attributes
type: admin
leaseTime: 99
reauthTime: 199
Figure 561 RADIUS Example: Keywords for User Attributes
type=user;leaseTime=222;reauthTime=222
To Next Page
Loading...
