Chapter 4 Easy Mode
ZyWALL USG Series User’s Guide
84
• Initial Setup Wizard for Internet access - you should have your Internet access account information at
hand
• VPN Wizard for a site-to-site tunnel between Zyxel Device networks, a tunnel from a remote client
using the Zyxel client VPN software to the Zyxel Device network, or a tunnel from a remote client using
other VPN software to the Zyxel Device network
• Port Forwarding Wizard to set up a server, such as a NAS in your network that you or other people can
access from outside the network
• Wi-Fi and Guest Wizard to set up a wireless name and security for normal and guest (Internet only)
wireless access to the Zyxel Device
• Security Service Wizard to configure subscriptions for content filtering, IDP, and anti-virus services.
There are also links to:
• MyZyxel Portal where you can subscribe for security services such as content filtering, IDP, and anti-
virus
• One Security Portal where you can get configuration walkthroughs, troubleshooting help and other
help on security services and VPN
• Expert Mode which contains all the advanced menus.
4.1.3 Easy Mode Settings
Click to display the Easy Mode Settings menu.
Figure 62 Easy Mode Settings
• Create Recovery Point - a recovery point is a point to which all the Zyxel Device’s configuration can
be reset to after you click Create Recovery Point. Choose this when you have some configurations
done and everything is working correctly.
• Restore Last Recovery Point - choose this if you have problems with recent configurations done on the
Zyxel Device and you want to return to a previous configuration point where everything was working
correctly. You will lose all configurations done after the restore point.
• Restart - reboot the Zyxel Device after upgrading new firmware. It may also be useful when
troubleshooting. Changes in the Web configurator are saved automatically and do not change
when you reboot. If you made changes in the CLI, however, you have to use the write command to
save the configuration before you reboot.
• Shutdown - use this to safely turn off the Zyxel Device in preparation for disconnecting the power.
Shutdown writes all cached data to the local storage and stops the system processes. It does not turn
off the power. Wait for the device to shut down before you manually turn off or remove the power.
To Next Page
Loading...
