ZyXEL Communications USG60W - User;Group MAC Address Summary Screen

Chapter 43 Object
ZyWALL USG Series User’s Guide
809
The following table describes the labels in this screen.
43.2.5 User/Group MAC Address Summary Screen
This screen shows the MAC addresses of wireless clients, which can be authenticated by their
MAC addresses using the local user database.
Click Configuration > Object > User/Group > MAC
Address to open this screen.
Note: You need to configure an SSID security profile’s MAC authentication settings to have
the AP use the Zyxel Device’s local database to authenticate wireless clients by their
MAC addresses.
Figure 558 Configuration > Object > User/Group > MAC Address
The following table describes the labels in this screen.
Table 300 Web Configurator for Non-Admin Users
LABEL DESCRIPTION
User-defined
lease time (max
... minutes)
Access users can specify a lease time shorter than or equal to the one that you specified. The
default value is the lease time that you specified.
Renew Access users can click this button to reset the lease time, the amount of time remaining before
the Zyxel Device automatically logs them out. The Zyxel Device sets this amount of time
according to the:
• User-defined lease time field in this screen
• Lease time field in the User Add/Edit screen (see Section 43.15.1.1 on page 903)
• Lease time field in the Setting screen (see Section 43.2.4 on page 804).
Updating lease
time
automatically
This box appears if you checked the Allow renewing lease time automatically box in the
Setting screen. (See Section 43.2.4 on page 804.) Access users can select this check box to
reset the lease time automatically 30 seconds before it expires. Otherwise, access users have
to click the Renew button to reset the lease time.
Remaining time
before lease
timeout
This field displays the amount of lease time that remains, though the user might be able to reset
it.
Remaining time
before auth.
timeout
This field displays the amount of time that remains before the Zyxel Device automatically logs
the access user out, regardless of the lease time.
Table 301 Configuration > Object > User/Group > MAC Address
LABEL DESCRIPTION
Add Click this to create a new entry.
Edit Double-click an entry or select it and click Edit to open a screen where you can modify the
entry’s settings.