ZyWALL USG Series User’s Guide
603
CHAPTER 29
Amazon VPC
29.1 Overview
Use this feature if you want to transmit traffic from a Customer Gateway (CG, the Zyxel Device)through
an IPSec tunnel to the Amazon VPC (Virtual Private Cloud).
Note: At the time of writing, you can use the web configurator to configure Amazon VPC on
ZyWALL USG20-VPN/USG20W-VPN/USG2200-VPN. You must use the Command Line
Interface to configure Amazon VPC on the other Zyxel Devices.
Figure 424 CG - to - Amazon VPC
29.2 Amazon VPC Configuration Process
The process to transmit traffic from a Customer Gateway (Zyxel Device) through an IPSec tunnel to an
Amazon VPC is:
1 Create an Amazon Web Services (AWS) account and configure VPN on Amazon VPC.
2 Download the tunnel configurations. Each VPN Connection has a VPN Connection ID, a Customer
Gateway Identifier and a Virtual Private Gateway Identifier. This is an example of these settings:
• Your VPN Connection ID: vpn-cf41a7a6
• Your Virtual Private Gateway ID: vgw-dac576db
To Next Page
Loading...
