Chapter 7 Monitor
ZyWALL USG Series User’s Guide
238
7.25 Detected Device
Use this screen to view information about wireless devices detected by the AP. Click Monitor > Wireless >
Detected Device to access this screen.
Note: At least one radio of the APs connected to the Zyxel Device must be set to monitor
mode (in the Configuration > Wireless > AP Management screen) in order to detect
other wireless devices in its vicinity.
Figure 195 Monitor > Wireless > Detected Device
The following table describes the labels in this screen.
Table 67 Monitor > Wireless > Detected Device
LABEL DESCRIPTION
Mark as Rogue
AP
Click this button to mark the selected AP as a rogue AP. A rogue AP can be contained in the
Configuration > Wireless > MON Mode screen.
Mark as Friendly
AP
Click this button to mark the selected AP as a friendly AP. For more on managing friendly APs,
see the Configuration > Wireless > MON Mode screen.
# This is the station’s index number in this list.
Status This indicates the detected device’s status.
Device This indicates the detected device’s network type (such as infrastructure or ad-hoc).
Role This indicates the detected device’s role (such as friendly or rogue).
MAC Address This indicates the detected device’s MAC address.
SSID Name This indicates the detected device’s SSID.
Channel ID This indicates the detected device’s channel ID.
802.11 Mode This indicates the 802.11 mode (a/b/g/n) transmitted by the detected device.
Security This indicates the encryption method (if any) used by the detected device.
To Next Page
Loading...
