Chapter 7 Monitor
ZyWALL USG Series User’s Guide
197
• Use the Wireless > AP Information > AP List screen (Section 7.16 on page 222) to display which APs are
currently connected to the Zyxel Device.
• Use the Wireless > AP Information > Radio List screen (Section 7.17 on page 228) to display statistics
about the wireless radio transmitters in each of the APs connected to the Zyxel Device.
• Use the Wireless > AP Information > Top N APs screen (Section 7.18 on page 231) to view managed
APs with the most wireless traffic usage and most associated wireless stations.
• Use the Wireless > AP Information > Single AP screen (Section 7.19 on page 233) to view APs wireless
traffic usage and associated wireless stations for a managed AP.
• Use the Wireless > ZyMesh screen (Section 7.20 on page 234) to display statistics about the ZyMesh
wireless connections between the managed APs.
• Use the Wireless > SSID Info screen (Section 7.21 on page 234) to display the number of wireless clients
that are currently connected to an SSID and the SSID’s security mode.
• Use the Wireless > Station Info > Station List screen (Section 7.23 on page 236) to view information on
connected wireless stations.
• Use the Wireless > Station Info > Top N Stations screen (Section 7.23 on page 236) to view wireless
stations with the most wireless traffic usage.
• Use the Wireless > Station Info > Single Station screen (Section 7.24 on page 237) to view wireless traffic
usage for an associated wireless station.
• Use the Wireless > Detected Device screen (Section 7.23 on page 236) to view information about
suspected rogue APs.
• Use the Printer Status screen (see Section 7.26 on page 239) to view information about the connected
statement printers.
• Use the SecuDeployer screen (see Section 7.27 on page 239) to view Zyxel Device SecuDeployer
client(s) managed by the Zyxel Device SecuDeployer server. A Zyxel Device SecuDeployer server
provisions local interfaces and IPSec tunnels to Zyxel Device SecuDeployer clients.
• Use the VPN Monitor > IPSec screen (Section 7.28 on page 244) to display and manage active IPSec
SAs.
• Use the VPN Monitor > SSL screen (see Section 7.29 on page 245) to list the users currently logged into
the VPN SSL client portal. You can also log out individual users and delete related session information.
• Use the VPN Monitor > L2TP over IPSec screen (see Section 7.30 on page 246) to display and manage
the Zyxel Device’s connected L2TP VPN sessions.
• Use the UTM Statistics > App Patrol screen (see Section 7.31 on page 247) to start or stop data
collection and view virus statistics
• Use the UTM Statistics > Content Filter screen (Section 7.32 on page 248) to start or stop data
collection and view content filter statistics.
• Use the UTM Statistics > IDP screen (Section 7.33 on page 250) to start or stop data collection and view
IDP statistics.
• Use the UTM Statistics > Anti-Virus screen (see Section 7.34 on page 252) to start or stop data
collection and view virus statistics.
• Use the UTM Statistics > Anti-Spam > Summary screen (Section 7.35 on page 254) to start or stop data
collection and view spam statistics.
• Use the UTM Statistics > Anti-Spam > Status screen (Section 7.35.2 on page 256) to see how many mail
sessions the Zyxel Device is currently checking and DNSBL statistics.
• Use the UTM Statistics > SSL Inspection screen (Section 7.36 on page 258) to see a report on SSL
Inspection and a certificate cache list.
• Use the UTM Statistics > Certificate Cache List screen (Section 7.36.1 on page 259) to display traffic to
destination servers using certificates.
To Next Page
Loading...
