Chapter 43 Object
ZyWALL USG Series User’s Guide
859
Figure 596 Configuration > Object > Schedule > Schedule Group
The following table describes the fields in the above screen.
43.9.3.1 The Schedule Group Add/Edit Screen
The Schedule Group Add/Edit screen allows you to define a schedule group or edit an existing one. To
access this screen, go to the Schedule screen (see), and click either the Add icon or an Edit icon in the
Schedule Group section.
Table 337 Configuration > Object > Schedule > Schedule Group
LABEL DESCRIPTION
Configuration
Add Click this to create a new entry.
Edit
Double-click an entry or select it and click Edit to be able to modify the entry’s
settings.
Remove
To remove an entry, select it and click Remove. The Zyxel Device confirms you want
to remove it before doing so.
References Select an entry and click References to open a screen that shows which settings use
the entry.
# This field is a sequential value, and it is not associated with a specific schedule.
Name This field displays the name of the schedule group, which is used to refer to the
schedule.
Description This field displays the description of the schedule group.
Members This field lists the members in the schedule group. Each member is separated by a
comma.
Reference This displays the number of times an object reference is used in a profile.
To Next Page
Loading...
