Chapter 2 The Web Configurator
VMG1312-Bx0D User’s Guide
25
Home
Networking
LAN Setup Use this screen to configure LAN TCP/IP settings, and other advanced
properties.
Static DHCP Use this screen to assign specific IP addresses to individual MAC
addresses.
UPnP Use this screen to turn UPnP and UPnP NAT-T on or off.
Additional
Subnet
Use this screen to configure IP alias and public static IP.
STB Vendor ID Use this screen to configure the Vendor IDs of the connected Set Top
Box (STB) devices, which have the VMG automatically create static
DHCP entries for the STB devices when they request IP addresses.
Wake on LAN Use this screen to remotely turn on a device on the local network.
TFTP Server
Name
Configure a TFTP server name which is sent to clients using DHCP
option 66.
Routing Static Route Use this screen to view and set up static routes on the VMG.
DNS Route Use this screen to forward DNS queries for certain domain names
through a specific WAN interface to its DNS server(s).
Policy Route
Use this screen to configure policy routing on the VMG.
RIP Use this screen to configure Routing Information Protocol to
exchange routing information with other routers.
QoS General Use this screen to enable QoS and traffic prioritizing. You can also
configure the QoS rules and actions.
Queue Setup Use this screen to configure QoS queues.
Classification
Setup
Use this screen to define a classifier.
Shaper Setup Use this screen to limit outgoing traffic rate on the selected interface.
Policer Setup
NAT Port Forwarding Use this screen to make your local servers visible to the outside
world.
Applications
Use this screen to configure servers behind the VMG.
Port Triggering Use this screen to change your VMG’s port triggering settings.
DMZ Use this screen to configure a default server which receives packets
from ports that are not specified in the Port Forwarding screen.
ALG Use this screen to enable or disable SIP ALG.
Address Mapping Use this screen to change your VMG’s address mapping settings.
Sessions Use this screen to configure the maximum number of NAT sessions
each client host is allowed to have through the VMG.
DNS DNS Entry Use this screen to view and configure DNS routes.
Dynamic DNS Use this screen to allow a static hostname alias for a dynamic IP
address.
IGMP/MLD IGMP/MLD Use this screen to configure multicast settings (IGMP for IPv4 and
MLD for IPv6 multicast groups) on the WAN.
Vlan Group Vlan Group Use this screen to group and tag VLAN IDs to outgoing traffic from
the specified interface.
Interface
Grouping
Interface
Grouping
Use this screen to map a port to a PVC or bridge group.
USB Service File Sharing Use this screen to enable file sharing via the VMG.
Media Server Use this screen to use the VMG as a media server.
Table 3 Navigation Panel Summary (continued)
LINK TAB FUNCTION
To Next Page
Loading...
