Chapter 37 Diagnostic
VMG1312-Bx0D User’s Guide
250
37.3 Ping & TraceRoute & Nslookup
Use this screen to ping, traceroute, or nslookup an IP address. Click Maintenance > Diagnostic >
Ping&TraceRoute&Nslookup to open the screen shown next.
Figure 163 Maintenance > Diagnostic > Ping &TraceRoute&Nslookup
The following table describes the fields in this screen.
37.4 802.1ag
Click Maintenance > Diagnostic > 8.2.1ag to open the following screen. Use this screen to
perform CFM actions.
Figure 164 Maintenance > Diagnostic > 802.1ag
Table 121 Maintenance > Diagnostic > Ping & TraceRoute & Nslookup
LABEL DESCRIPTION
TCP/IP Address Type the IP address of a computer that you want to perform ping, traceroute, or nslookup in
order to test a connection.
Ping Click this to ping the IP address that you entered.
TraceRoute Click this button to perform the traceroute function. This determines the path a packet
takes to the specified computer.
Nslookup Click this button to perform a DNS lookup on the IP address of a computer you enter.
To Next Page
Loading...
