Chapter 14 Interface Grouping
VMG1312-Bx0D User’s Guide
182
14.2.2 Interface Grouping Criteria
Click the Add button in the Interface Grouping Configuration screen to open the following
screen.
Figure 102 Interface Grouping Criteria
The following table describes the fields in this screen.
Filter Criteria This shows the filtering criteria. The LAN interface on which the matched traffic is received
will belong to this group automatically.
WildCard
Support
This shows if wildcard on DHCP option 60 is enabled.
Modify Click the Edit icon to change the group setting
Click the Delete icon to delete this group from the VMG.
OK Click OK to save your changes.
Cancel Click Cancel to exit this screen without saving.
Table 74 Interface Group Configuration (continued)
LABEL DESCRIPTION
Table 75 Interface Grouping Criteria
LABEL DESCRIPTION
Source MAC
Address
Select this option and enter the source MAC address of the packet.
DHCP Option
60
Select this option and enter the Vendor Class Identifier (Option 60) of the matched traffic,
such as the type of the hardware or firmware.
Enable
wildcard
Select this option to be able to use wildcards in the Vendor Class Identifier configured for
DHCP option 60.
DHCP Option
61
Select this and enter the device identity of the matched traffic.
Enter the Identity Association Identifier (IAID) of the device, for example, the WAN
connection index number.
DHCP Option
125
Select this and enter vendor specific information of the matched traffic.
To Next Page
Loading...
