Chapter 2 The Web Configurator
VMG1312-Bx0D User’s Guide
24
2.2.2 Main Window
The main window displays information and configuration fields. It is discussed in the rest of this
document.
After you click the right arrow icon on the Connection Status (Network Map) page, the Status
screen is displayed. See Chapter 5 on page 55 for more information about the Status screen.
2.2.3 Navigation Panel
Use the menu items on the navigation panel to open screens to configure VMG features. The
following tables describe each menu item.
Table 3 Navigation Panel Summary
LINK TAB FUNCTION
Connection Status This screen shows the network status of the VMG and computers/
devices connected to it.
Network Setting
Broadband Broadband Use this screen to view and configure ISP parameters, WAN IP
address assignment, and other advanced properties. You can also add
new WAN connections.
3G Backup Use this screen to configure 3G/LTE WAN connection.
Advanced Use this screen to enable or disable PTM over ADSL, Annex M/Annex
J, and DSL PhyR functions.
Ethernet WAN Use this screen to convert Ethernet LAN 4 port as WAN port, or
restore the WAN port to LAN port.
802.1x Use this screen to view and configure the IEEE 802.1x settings on the
VMG.
Wireless General Use this screen to configure the wireless LAN settings and WLAN
authentication/security settings.
Guest/More AP Use this screen to configure multiple BSSs on the VMG.
MAC
Authentication
Use this screen to block or allow wireless traffic from wireless devices
of certain SSIDs and MAC addresses to the VMG.
WPS Use this screen to configure and view your WPS (Wi-Fi Protected
Setup) settings.
WMM Use this screen to enable or disable Wi-Fi MultiMedia (WMM).
WDS Use this screen to set up Wireless Distribution System (WDS) links to
other access points.
Others Use this screen to configure advanced wireless settings.
Channel Status Use this screen to scan wireless LAN channel noises and view the
results.
To Next Page
Loading...
