ZyXEL Communications VMG1312-BX0D - Configuring the Wireless Network Settings; Setting up a Secure Wireless Network

Chapter 4 Tutorials
VMG1312-Bx0D User’s Guide
34
4.3 Setting Up a Secure Wireless Network
Thomas wants to set up a wireless network so that he can use his notebook to access the Internet.
In this wireless network, the VMG serves as an access point (AP), and the notebook is the wireless
client. The wireless client can access the Internet through the AP.
Thomas has to configure the wireless network settings on the VMG. Then he can set up a wireless
network using WPS (Section 4.3.2 on page 36) or manual configuration (Section 4.3.3 on page 39).
4.3.1 Configuring the Wireless Network Settings
This example uses the following parameters to set up a wireless network.
1 Click Network Setting > Wireless to open the General screen. Select More Secure as the
security level and WPA2-PSK as the security mode. Configure the screen using the provided
parameters (see page 34). Click Apply.
SSID Example
Security Mode WPA2-PSK
Pre-Shared Key DoNotStealMyWirelessNetwork
802.11 Mode 802.11b/g/n Mixed