ZyXEL Communications VMG1312-BX0D - Page 27

Chapter 2 The Web Configurator
VMG1312-Bx0D User’s Guide
27
3G Statistics 3G Statistics Use this screen to look at 3G Internet connection status.
Maintenance
System System
Use this screen to set Device name and Domain name.
User Account User Account Use this screen to change user password on the VMG.
Remote
Management
MGMT Services Use this screen to enable specific traffic directions for network
services.
Trust Domain Use this screen to configure a list of public IP addresses which are
allowed to access the VMG.
SNMP SNMP Use this screen to configure SNMP (Simple Network Management
Protocol) settings.
Time Time Use this screen to change your VMG’s time and date.
Email
Notification
Email
Notification
Use this screen to configure up to two mail servers and sender
addresses on the VMG.
Log Setting Log Setting Use this screen to change your VMG’s log settings.
Firmware
Upgrade
Firmware
Upgrade
Use this screen to upload firmware to your VMG.
Backup Restore Backup/Restore Use this screen to backup and restore your VMG’s configuration
(settings) or reset the factory default settings.
Reboot Reboot Use this screen to reboot the VMG without turning the power off.
Diagnostic Ping&Traceroute
&Nslookup
Use this screen to identify problems with the DSL connection. You can
use Ping, TraceRoute, or Nslookup to help you identify problems.
802.1ag Use this screen to configure CFM (Connectivity Fault Management)
MD (maintenance domain) and MA (maintenance association),
perform connectivity tests and view test reports.
OAM Ping Use this screen to view information to help you identify problems with
the DSL connection.
Table 3 Navigation Panel Summary (continued)
LINK TAB FUNCTION