Chapter 1 Introducing the VMG
VMG3926-B10A User’s Guide
20
Figure 4 LEDs on the VMG
None of the LEDs are on if the VMG is not receiving power.
Table 1 LED Descriptions
LED COLOR STATUS DESCRIPTION
Power
Green On The VMG is receiving power and ready for use.
Blinking The VMG is self-testing.
Red On The VMG detected an error while self-testing, or there is a device
malfunction.
Off The VMG is not receiving power.
DSL
Green On The VDSL line is up.
Blinking The VMG is initializing the VDSL line.
Orange On The ADSL line is up.
Blinking The VMG is initializing the ADSL line.
Off The DSL line is down.
Internet
Green On The VMG has an IP connection but no traffic.
Your device has a WAN IP address (either static or assigned by a DHCP
server), PPP negotiation was successfully completed (if used) and the
DSL connection is up.
Blinking The VMG is sending or receiving IP traffic.
Off There is no Internet connection or the gateway is in bridged mode.
Red On The VMG attempted to make an IP connection but failed. Possible
causes are no response from a DHCP server, no PPPoE response, PPPoE
authentication failed.
Ethernet
WAN
Green On The VMG has a successful 1000 Mbps Ethernet connection on the WAN.
Blinking The VMG is sending or receiving data to/from the WAN at 1000 Mbps.
Orange On The VMG has a successful 10/100 Mbps Ethernet connection on the
WAN.
Blinking The VMG is sending or receiving data to/from the WAN at 10/100 Mbps.
Off There is no Ethernet connection on the WAN.
LAN1~4
Green On The VMG has a successful 1000 Mbps Ethernet connection with a device
on the Local Area Network (LAN).
Blinking The VMG is sending or receiving data to/from the LAN at 1000 Mbps.
Off The VMG does not have an Ethernet connection with the LAN.
2.4G WLAN/
WPS
Green On The 2.4 GHz wireless network is activated.
Blinking The VMG is communicating with 2.4 GHz wireless clients.
Orange Blinking The VMG is setting up a WPS connection with a 2.4 GHz wireless client.
Off The 2.4 GHz wireless network is not activated.
5G WLAN/
WPS
Green On The 5 GHz wireless network is activated.
Blinking The VMG is communicating with 5 GHz wireless clients.
Orange Blinking The VMG is setting up a WPS connection with a 5 GHz wireless client.
Off The 5 GHz wireless network is not activated.
To Next Page
Loading...
