Chapter 7 Wireless
VMG3926-B10A User’s Guide
95
Figure 34 Network Setting > Wireless > Guest / More AP
The following table describes the labels in this screen.
7.3.1 Edit Guest / More AP
Use this screen to edit an SSID profile. Click the Edit icon next to an SSID in the Guest / More AP
screen. The following screen displays.
Table 20 Network Setting > Wireless > Guest / More AP
LABEL DESCRIPTION
# This is the index number of the entry.
Status This field indicates whether this SSID is active. A yellow bulb signifies that this SSID is active.
A gray bulb signifies that this SSID is not active.
SSID An SSID profile is the set of parameters relating to one of the VMG’s BSSs. The SSID (Service
Set IDentifier) identifies the Service Set with which a wireless device is associated.
This field displays the name of the wireless profile on the network. When a wireless client
scans for an AP to associate with, this is the name that is broadcast and seen in the wireless
client utility.
Security This field indicates the security mode of the SSID profile.
Guest WLAN This displays if the guest WLAN function has been enabled for this WLAN.
If Home Guest displays, clients can connect to each other directly.
If External Guest displays, clients are blocked from connecting to each other directly.
N/A displays if guest WLAN is disabled.
Modify Click the Edit icon to configure the SSID profile.
To Next Page
Loading...
