ZyXEL Communications VMG3926-B10A - Traffic Status; Chapter 22 Traffic Status; Overview; What You Can Do in this Chapter

VMG3926-B10A User’s Guide
221
CHAPTER 22
Traffic Status
22.1 Overview
Use the Traffic Status screens to look at network traffic status and statistics of the WAN, LAN
interfaces and NAT.
22.1.1 What You Can Do in this Chapter
•Use the WAN screen to view the WAN traffic statistics (Section 22.2 on page 221).
•Use the LAN screen to view the LAN traffic statistics (Section 22.3 on page 222).
•Use the NAT screen to view the NAT status of the VMG’s client(s) (Section 22.4 on page 223)
22.2 The WAN Status Screen
Click System Monitor > Traffic Status to open the WAN screen. The figure in this screen shows
the number of bytes received and sent on the VMG.
Figure 129 System Monitor > Traffic Status > WAN
The following table describes the fields in this screen.
Table 99 System Monitor > Traffic Status > WAN
LABEL DESCRIPTION
Connected
Interface
This shows the name of the WAN interface that is currently connected.
Packets Sent
Data This indicates the number of transmitted packets on this interface.
Error This indicates the number of frames with errors transmitted on this interface.
Drop This indicates the number of outgoing packets dropped on this interface.