Chapter 30 Remote Management
VMG3926-B10A User’s Guide
242
30.3 The Trust Domain Screen
Use this screen to view a list of public IP addresses which are allowed to access the VMG through
the services configured in the Maintenance > Remote MGMT screen. Click Maintenance >
Remote MGMT > Turst Domain to open the following screen.
Note: If this list is empty, all public IP addresses can access the VMG from the WAN
through the specified services.
Figure 142 Maintenance > Remote MGMT > Trust Domain
The following table describes the fields in this screen.
30.4 The Add Trust Domain Screen
Use this screen to configure a public IP address which is allowed to access the VMG. Click the Add
Trust Domain button in the Maintenance > Remote MGMT > Turst Domain screen to open the
following screen.
Figure 143 Maintenance > Remote MGMT > Trust Domain > Add Trust Domain
Apply Click Apply to save your changes back to the VMG.
Cancel Click Cancel to restore your previously saved settings.
Table 111 Maintenance > Remote MGMT (continued)
LABEL DESCRIPTION
Table 112 Maintenance > Remote MGMT > Trust Domain
LABEL DESCRIPTION
Add Trust
Domain
Click this to add a trusted host IP address.
IP Address This field shows a trusted host IP address.
Delete Click the Delete icon to remove the trust IP address.
To Next Page
Loading...
