Chapter 38 Backup Restore
VMG3926-B10A User’s Guide
265
Figure 160 Reset Warning Message
Figure 161 Reset In Process Message
You can also press the RESET button on the rear panel to reset the factory defaults of your VMG.
Refer to Section 1.6 on page 21 for more information on the RESET button.
38.3 The ROM-D Screen
The ROM-D feature enables service providers to customize the VMG’s default configuration settings
easily. You can use the ROM-D file to store the customized default settings. Click Save to save the
VMG’s current configuration to the ROM-D file. Click Clean to reset the customized settings in the
ROM-D file to factory defaults.
Click Maintenance > Backup Restore > ROM-D to open the following screen.
Figure 162 Backup Restore > ROM-D
38.4 The Reboot Screen
System restart allows you to reboot the VMG remotely without turning the power off. You may need
to do this if the VMG hangs, for example.
Click Maintenance > Reboot. Click Reboot to have the VMG reboot. This does not affect the
VMG's configuration.
Figure 163 Maintenance > Reboot
To Next Page
Loading...
Need help?
General
