Chapter 22 Traffic Status
VMG3926-B10A User’s Guide
223
22.4 The NAT Status Screen
Click System Monitor > Traffic Status > NAT to open the following screen. The figure in this
screen shows the NAT session statistics for hosts currently connected on the VMG.
Figure 131 System Monitor > Traffic Status > NAT
The following table describes the fields in this screen.
Sent (Packets)
Data This indicates the number of transmitted packets on this interface.
Error This indicates the number of frames with errors transmitted on this interface.
Drop This indicates the number of outgoing packets dropped on this interface.
Received (Packets)
Data This indicates the number of received packets on this interface.
Error This indicates the number of frames with errors received on this interface.
Drop This indicates the number of received packets dropped on this interface.
Table 100 System Monitor > Traffic Status > LAN (continued)
LABEL DESCRIPTION
Table 101 System Monitor > Traffic Status > NAT
LABEL DESCRIPTION
Refresh Interval Select how often you want the VMG to update this screen.
Device Name This displays the name of the connected host.
IP Address This displays the IP address of the connected host.
MAC Address This displays the MAC address of the connected host.
No. of Open
Session
This displays the number of NAT sessions currently opened for the connected host.
Total This displays what percentage of NAT sessions the VMG can support is currently being used
by all connected hosts. You can also see the number of active NAT sessions and the
maximum number of NAT sessions the VMG can support.
To Next Page
Loading...
