ZyXEL Communications XGS1210-12 - Leds

Chapter 3 Hardware Panels
XGS1210-12 User’s Guide
16
3.3 LEDs
After you connect the power to the Switch, view the LEDs to ensure proper functioning of the Switch
and as an aid in troubleshooting.
Table 3 LED Descriptions
LED COLOR STATUS DESCRIPTION
PWR/SYS Green On The Switch power is on.
Blinking The Switch is starting up.
Off The Switch power is off.
Ports 1-8
LINK/ACT
Green On The port has a successful 1000 Mbps connection.
Blinking The Switch is transmitting data through the port.
Amber On The port has a successful 10/100 Mbps connection.
Blinking The Switch is transmitting data through the port.
Off The port is disconnected or disabled.
If you enable Loop Prevention in the Port screen, and a loop
happens on two ports, the higher-numbered port will be off.
Port 9
(Left LED)
Port 10
(Right LED)
Sky Blue On The port has a successful 2.5 Gbps connection.
Blinking The Switch is transmitting data through the port.
Green On The port has a successful 1000 Mbps connection.
Blinking The Switch is transmitting data through the port.
Amber On The port has a successful 100 Mbps connection.
Blinking The Switch is transmitting data through the port.
Off The port is disconnected or disabled.
Port 11
(Left LED)
Port 12
(Right LED)
Blue On The port has a successful 10 Gbps connection.
Blinking The Switch is transmitting data through the port.
Green On The port has a successful 1000 Mbps connection.
Blinking The Switch is transmitting data through the port.
Off The port is disconnected or disabled.